SCR Speed, DC Drives, Chassis 9

The KBIC Series of DC Drives consist of six models rated for 1/100 to 3 horsepower motors.* All models can be used on a wide range of motor horsepower by inserting a Plug-In Horsepower Resistor®**, which is required to operate the drive. Speed range is 50:1 with load regulation of 1% of base speed. These chassis drives include MOV transient protection, trimpot adjustments for MIN, MAX, ACCEL, IR, CL, and a 5k ohm potentiometer. This drive also contains Auto Inhibit® which provides a smooth, safe start during rapid switching of the AC line.

Options: Auxiliary Heat Sink (P/N 9861), Barrier Terminal Kit (P/N 9863) Barrier Terminal Board (P/N 9884), SI-5 Signal Isolator (P/N 9443), Combination Fuse kit (P/N 9849). AC line and Armature fuse supplied separately.

*An Auxiliary Heat Sink is required when operating motors above ½ HP at 90VDC and 1 HP at 180VDC.

**Plug-In Horsepower Resistor®, AC line fuse and Armature fuse supplied separately.