|Input Amps AC:||12 Amps|
|Output Armature VDC:||90 VDC, 180 Volts VDC|
|Max HP @ 180 VDC Armature:||3 Horsepower|
|Input Phase:||1 A|
|Output Field Amps DC:||100 VDC, 200 VDC, 50 VDC|
|Feedback Types:||Armature, Tachometer|
|Operator Controls:||Not Available|
|Temperature Range (F):||32-113 °F|
|Nominal Armature VDC:||90 VDC, 180 VDC|
|Net Weight:||0.8 lbs|
|Product Summary:||Operates off 115/230 Volt AC line, 50/60 Hz. Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.|
The KBMM-225D is a 115/230 VAC rated 12 Amps RMS @ 45C. The control is designed for 90 and 180 VDC PM and Shunt motors. It will control motors between 1/100-1.5 HP (3.0 HP w/aux. Heat sink) by inserting the proper Plug-in Horsepower Resistor. Speed range is 50:1 with load regulation of 1%. Features include: AC Line fuse and Armature Fuse holder, Auto Inhibit, Voltage Following, MOV transient protection, 5K speed pot and trimpot adjustments for Min, Max, Accel, Decel, IR and CL. Options include Auxiliary heat sink, Barrier Terminal Board, RFI/EMI filters and Signal Isolation (model SI-6).
Options include Auxiliary heat sink, Barrier Terminal Board, RFI/EMI filters and Signal Isolation (model SI-6). UL, CSA, CE, C-tick. (CCC pending) Patented.
4.30” x 3.60” x 1.30”.