|Input Amps AC:||12 Amps|
|Output Armature VDC:||90 Volts DC|
|Max HP @ 90 VDC Armature:||1 1/2 Horsepower|
|Input Phase:||1 A|
|Output Field Amps DC:||100 VDC, 50 VDC|
|Feedback Types:||Armature, Tachometer|
|Operator Controls:||Not Available|
|Temperature Range (F):||32-113 °F|
|Nominal Armature VDC:||90 VDC|
|Net Weight:||0.8 lbs|
|Product Summary:||Operates off 115 Volt AC line, 50/60 Hz. Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.|
The KBMM-125 is an adjustable speed DC Drive. It will control motors between 1/100-3/4 HP (1.5 HP w/aux. Heat-sink) by inserting the proper Plug-in Horsepower Resistor. The KBMM-125 motor speed control is designed for 90 VDC PM and Shunt motors. Speed range is 50:1 with load regulation of 1%. Features include: AC Line fuse and Armature Fuse holder, Auto Inhibit, Voltage Following, MOV transient protection, 5K speed pot and trimpot adjustments for Min, Max, Accel, Decel, IR and CL.
Options include Auxiliary heat sink, Barrier Terminal Board, RFI/EMI filters and Signal Isolation (model SI-6). This control is available worldwide from stocking KB distributors. UL, CSA, CE, C-tick. (CCC pending) Patented.
4.30” x 3.60” x 1.30”.