| Series: | KBCC |
| Input Amps AC: | 24 Amps |
| Output Armature VDC: | 90 VDC |
| Max HP @ 180 VDC Armature: | 1 1/2 Horsepower |
| Input Phase: | 1 |
| Output Field Amps DC: | 100 VDC, 50 VDC |
| Regen: | No |
| Feedback Types: | Armature, Tachometer |
| Operator Controls: | Not Available |
| Package: | Chassis |
| Temperature Range (F): | 32-113 °F |
| Approvals: | cUL, UL |
| Nominal Armature VDC: | 90 VDC |
| Net Weight: | 4 lbs |
| Product Summary: | Operates off 115 Volt AC line, 50/60 Hz. Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range. |
This item is discontinued and no longer available. Suggested crossover from KB Electronics is the KBMM-225d(9451) with the 7" inch Heatsink (9861)
The KBCC Series of DC Drives consist of two models rated for 1/100 to 3 horsepower motors. These chassis drives utilize the KBMM speed control to provide a low-cost, reliable SCR drive. Features include an Auxiliary Heat Sink, Barrier Terminal Block, AC line fuse, and an Armature fuse holder. This drive requires a Plug-in Horsepower Resistor®* to operate. The controls are ruggedly constructed and contain a 5k ohm potentiometer. This drive also contains Auto Inhibit® which provides a smooth, safe start during rapid switching of the AC line.
**Plug-In Horsepower Resistor® and Armature fuse supplied separately.
Dimensions: 6.3" x 7.0" x 2.60"
Options include Auxiliary heat sink, Barrier Terminal Board, RFI/EMI filters and Signal Isolation.
UL, CSA, CE, C-tick. (CCC pending) Patented.
